Materials Needed:

• Vehicle with ClashX Pro lines.
• Battery (fully discharged).
• Battery management system (BMS).
• Alternator.
• Transformer.
• Wire (to test).

Setup:

1. Connect Battery String: Pull the battery string and ensure it's functioning correctly.
2. Check BMS: Use the BMS to monitor current and charge status.
3. Connect Alternator: Attach the alternator to the battery string and test continuous current.
4. Connect Transformer: Insert the transformer into the alternator and battery circuit to handle alternating current.
5. Test Current and Voltage:
   • Connect battery to alternator and check current.
   • Connect alternator to battery and confirm current consistency.
   • Use a multimeter on wires to measure current (should be zero for conduction).

Wire Testing:

• Disconnect everything and connect wires to a multimeter.
• Test each wire pair, ensuring proper insulation and no leaks.
• Use probes to measure current, adjusting to ensure zero for conduction.

Additional Considerations:

• Alternator Safety: Ensure continuous current and check voltage overruns.
• Wire Insulation: Use clean wires and test for gaps.
• Overvoltage Test: Connect alternator to battery and check voltage levels.

Safety and Documentation:

• Always use a multimeter and test isolation between components.
• Document findings and ensure secure connections.

By following these steps, you can systematically test each component of the ClashX Pro lines, ensuring all functions are operational and identifying any potential issues.